Subjects: Geosciences >> Space Physics submitted time 2016-05-04
Abstract： Large planar plasma sheets with size of 60 cm*60 cm, maximum current of 3 A and duration of 200 mus, were obtained in a pulsed linear hollow cathode discharge device under 15 mT magnetic field confinement. The electron density 2-D distribution in the thickness direction and its evolution of plasma sheets with pressures between 90 Pa to 210 Pa were obtained by Langmuir probe using the fast frame function of oscilloscope and the rotating hollow cathode method. The effects of pressure on the time needed to reach the maximum peak density in the thickness direction, the maximum peak density and the full width at half maximum (FWHM) peak density, were investigated. The results show that, as the pressure decreased, the time reaching the maximum peak density in the thickness direction and the FWHM peak density diminished, while the maximum peak density in the thickness direction increased. These results could be utilized to manipulate the parameters of large planar plasma sheets.
Peer Review Status:
Awaiting Review
Subjects: Geosciences >> Space Physics submitted time 2016-05-04
Abstract： Large planar plasma sheets, generated by a linear hollow cathode in pulse discharge mode under magnetic confinement, can be used in the field of plasma antenna, plasma stealth, and simulation of a plasma layer surrounding vehicles traveling at hypersonic velocities within the Earth's atmosphere. Firstly, to investigate the propagation properties of electromagnetic waves at different frequencies and polarization, the transverse field transfer matrix method is introduced. Secondly, the measured electron density temporal and spatial distribution and the transverse field transfer matrix method are utilized to calculate the reflection, transmission and absorption of electromagnetic waves by large planar plasma sheets with different currents. Finally, 1 GHz (less than the critical cut-off frequency) electromagnetic waves and 4 GHz (greater than the critical frequency) electromagnetic waves are chosen to investigate the evolution of propagation properties during the pulsed discharge period. Results show that both the reflection and absorption of the electromagnetic waves are greater for their polarization direction parallel to that of magnetic field, and their frequencies lower than the critical cut-off frequency, and as the discharge currents rise, the reflection increases while the absorption decreases. However both the reflection and absorption of the electromagnetic waves with their polarization direction perpendicular to the magnetic field direction and their frequency greater than the critical cut-off frequency become less, and as the discharge currents rise, both the reflection and absorption will increase. For the electromagnetic waves with their polarization direction perpendicular to the magnetic field direction, there is an upper hybrid resonance absorption band near the upper hybrid resonance frequencies, in which the absorption is significant but the absorption peak value is not affected by the discharge current. The propagation characteristics of the electromagnetic waves with polarization direction perpendicular to the magnetic field direction are the same as that of the electromagnetic waves with the polarization direction parallel to the magnetic field direction, except the upper hybrid resonance absorption. During the pulse discharge period, the propagation characteristic of the electromagnetic waves experiences an unstable phase before reaching steady states. The transition time is about 100 mu s and increases as the discharge current rises. The upper hybrid resonance absorption is significant during the phase of steady state for waves with frequency lower than the critical cut-off frequency and polarization direction parallel to the magnetic field direction. For the applications of a large planar plasma sheet to reflect electromagnetic waves effectively and steadily, the pulse discharge period should be larger than 100 mu s, and its discharge current should be large enough to make the critical cut-off frequency greater than the frequency of incident wave, and its polarization direction should be parallel to the magnetic field direction.
Peer Review Status:Awaiting Review
Hits
Hits
Downloads
Comment