Subjects: Nuclear Science and Technology >> Nuclear Materials and Techniques submitted time 2023-06-18 Cooperative journals: 《Nuclear Science and Techniques》
Abstract： Reversible addition-fragmentation chain transfer (RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate) (PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis. The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.
Subjects: Nuclear Science and Technology >> Nuclear Materials and Techniques submitted time 2023-06-18 Cooperative journals: 《Nuclear Science and Techniques》
CHI Hong-Ying
LIU Xi-Yan
MA Hong-Juan
YANG Xiao-Juan
YU Ming
ZHANG Jian-Yong
WANG Min
LI Jing-Ye
Hiroyuki Hoshina
Noriaki Seko
Abstract： Amino-type adsorbents (ATAs) were prepared by radiation-induced graft copolymerization of 4-hydroxybutyl acrylate glycidyl ether (HB) onto a polyethylene-coated polypropylene (PE/PP) duplex fiber of a non-woven fabric, and modified with different amines of ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and diethylamine (DEA). The adsorption behavior of uranyl ions onto the ATAs was studied in batch experiments. The effects of the contact time, initial concentration of the ions, temperature, and pH value. The salinity were investigated along with the adsorption kinetics and the adsorption isotherms. The kinetic experimental data followed the pseudo second-order kinetic model, and the adsorption isotherms correlated well with the Langmuir model. The ATAs showed good efficiency in adsorbing uranyl ions, with the best saturation adsorption capacity being 64.26 mg g-1 for ATA-DETA within 120 min. The temperature dependence of ATA-DETA was quite abnormal and the quickest behavior was obtained at 25 ℃. ATAs showed good adsorption capacity over a wide pH range of 4.0–8.5, and HCl could be used in the elution process. Salinity of the solution had great effect on the adsorption capacity, 3.5% salinity resulted in a 55% loss of capacity from ATA-DETA. The selectivity of ATA-DETA showed an order of: UO22+≈ Fe3+ > Zn2+ > VO3- > Co2+ > Ni2+.
Hits
YES
Hits
Downloads
Comment